![]() You don't need a mixer (it will introduce additional and unnecessary complexity in your setup). The Link.USB is a two-channel, bus-powered USB audio recording in. FREE Shipping on orders over 25 shipped by Amazon. (1) XLR Mic input with preamp and 48V phantom power & (2) 1/4w DI inputs. You may be able to find cheaper solutions - just make sure it has the XLR input, has phantom power (often just indicated with +48V on the front), is USB and records at 24Bit (to avoid future noise issues). Phantom Power Supply,48V Portable Phantom Power Supply with USB and One XLR Audio Cable for Any Condenser Microphone Music Recording Equipment. Something like this ( Presonus AudioBox USB): That points in one direction only: an external audio interface. Moreover you may as well spare yourself of the future trouble with noisy build-in sound adapters (line in/ mic-in). So - you need to be able to record a balanced signal via XLR and provide phantom power to the microphone. The actual user interface may vary with Quite often, the voltage is too low or the available current insufficient to power a condenser microphone properly, which could result in increased noise and/or reduced audio quality Phantom power at +48v (created via a voltage multiplier circuit inside the interface) is by standard sent through 6 Phantom. The GXL2200 microphone has the following specifications - notice the P48 phantom power requirements: Operating Principle: Externally-biased condenser XLR connectors look like these two (female and male): Connect the SMPS-1 to the AC power supply (115230VAC) 4. Connect the SMPS-1 Signal Output to your mixer 3. It is pretty much standard with when working with professional audio gear (it is rugged and less susceptible to noise). Nady SMPS-1 Phantom Power Supply, connect in the following order: 1. For the 48V to 24V you can use a buck converter such as TPS40200 which accepts input voltages up to 52V. If you really want to get +48V/-48V to +24/-24V there is a way (possibly). ![]() The "three prong plug" you are talking about is an XLR connector. The 24V suggests a relatively high power amplifier, which means the horrific lack of efficiency is going to be an issue.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |